|
|
|
|
Model
DHT
• Hand tachometer in shock resistant case
• Tolerance ±.5% of extreme scale value
• RPM 16 - 20,000, FPM 5 - 6,000
Model DHT-2
• RPM 40 - 50,000
• FPM 12 - 15,000
Model DHT-M
• Metric equivalent
• RPM 16 - 20,000, MPM 6 - 2,000
Model DHTW
• Replacement measuring wheel for tachometer
|
DHT Series
DHTW
|
|
Model
DT-100
• LCD 6 Digit Display
• Contact / noncontact, digital, optical, tachometer
offers safe, non-contact operation to 30” and 30°
from target
• Range 2.5 to 100,000 RPM with totalizer / counter
• 3 button , 30 function instrument
• Accuracy 70± .01%, resolution to .0001 RPM
• Minimum, maximum, and last measurement memory
• Totalizer/counter
• Timer (stopwatch)
• Economic design allows viewing target and display
simultaneously
• On test indicator
• User test mode
• 9 volt battery included
• Low battery indicator
• Made in U.S.A.
• Weight - 6 oz., can fit in a shirt pocket
• Warranty - 1 year
• Accessories included - 5 foot roll of
reflective tape, contact tip assembly,
linear speed wheel, instruction manual,
plastic, latching carrying case
|
DT-100
|
|
Model DT-105
LCD 5 digit display
Model DT-107
LED 5 digit display
Battery operated, hand held, computer circuitry controlled, contact type
tachometers offering the following distinct advantages:
• Housing made of strong die-cast aluminum
• Display range - 0.1 to 25,000 rpm with floating decimal
• Accuracy ±1 rpm: 1000 to 25,000
• Display - 5 digit 0.4” (10mm) high LED
• Update time - typically 1 second
• Batteries, included - 4 AA 1.5V
• Low voltage indicator - “B” display
• Memory system readings are stored in memory and retained
for 4 minutes
• Detection - Optical Coupler 60 pulses/rev.
• System control - single chip C-MOS microprocessor
• Over range indicator - 3 decimals appear between numbers
• Operating temperature - 32° to113° F (0-45)
• Measuring units - Revolutions: RPH, RPS, RPM feet; FPH, FPS, FPM
Miles; MPH, Yards, YPH, YPS, YPM Inches; IPH, IPM, IPS
Meters; MPH, MPM, CMPS
• Weight - 1 pound
• Dimensions - 8.3”L x 2.4”W x 2”H
• Warranty - 1 year
• Accessories included - 2 cone adapters, 1 funnel adapter, 3-1/2” extension
shaft, carrying case, operating instructions, 1 master wheel (6” cir)
Model FPM-6
• Replacement wheel 6” circumference.
Model FPM-12
• Replacement wheel 12” circumference.
|
DT-107
|
|
|
|
