Click for HOME Click for CONTENTS Click for INDEX Click for SEARCH Click for ORDER FORM Click for INFO blue95.gif (868 bytes)

line.gif (880 bytes)

   ELEVATOR PIT SCAVENGER PUMP

  

 

• Scavenger or oil return pump, returns
  small leakage of oil from the cylinder
  head back to the pump unit.
• Internal float switch automatically turns
  pump on and off.
• External float switch, if included, shuts off
  pump if pit begins to fill with water.
• Semi-transparent tank container and pit
  flood warning alarm are available options.
• Recommended to use with cylinder head
  drip ring Model CDR.


Elevator pit scavenger pumps PDF flyer
Elevator pit scavenger pumps
PDF flyer


Cylinder head drip rings PDF flyer
Cylinder head drip rings
PDF flyer



Heavy-Duty Scavenger Pump

Models OSC/B, OSC/B-1/3


Heavy-Duty Scavenger Pump equipped with 1/4 or 1/3 HP motor, backflow free volumetric pump with removable intake oil filter and external float switch. Unit designed for floor installation. Constructed of ribbed, reinforced high-density polyethylene 4.8-gallon capacity container with 16 gauge galvanized steel and Plexiglas cover. The clear 1/4” Plexiglas top allows visibility of the inner components of the unit. Plastic tubing 1/2" OD, 100 Ft. Model P02SP008 is included.

Unit
• Automatic oil discharge operation with internal oil float switch
• Pit flood control with manual reset, shuts off pump if water present
• Oil inlet: opening, 9/16” ID
• Oil discharge port: brass compression for 1/2" OD tubing
• Container: ribbed, high-density blue polyethylene, 4.8 Gal.
• Lid: clear 1/4" thick Plexiglas and 16 Ga. galvanized steel
• 100 Ft. plastic tubing 1/2"OD with fittings
• Power cord: 3x16 AWG with molded 3-prong plug, 8 Ft.

Approvals
• UL and CSA approved electrical components
Motor
Model OSC/B        1/4 HP, 5.0 FLA, 115VAC, 1 PH, 50/60Hz
Model OSC/B-1/3
   1/3 HP, 5.6 FLA, 115VAC, 1 PH, 50/60Hz
• Life time lubricated motor bearings
• Thermal overload protection
• Continuous duty rated
Pump
• Backflow free volumetric pump with rotary vane and brass body
• Wear resistant carbon graphite pumping chamber and vanes
• Removable stainless steel intake filter 200 mesh, 74 micron
• By-pass pump valve prevents motor overload
• 100-150 Ft. vertical discharge distance
Discharge, Model OSC/B, 1/4HP
• 49 GPH / 20 PSI / 46.2’ Head
• 39 GPH / 200 PSI / 462’ Head Shown for SG=1 (water)
Discharge Model OSC/B-1/3, 1/3HP
• 111 GPH / 20 PSI / 46.2’ Head
• 101 GPH / 200 PSI / 462’ Head
Shown for SG=1 (water)
Additional options
• Semi-transparent tank
• Pit flood warning alarm
• Cylinder head drip ring
Dimensions
• Container inside:     15.0"L x 9.25”W x 8.0”H
• Container outside:   16.5”L x 10.7”W x 8.0”H
• Overall dimensions: 20.5”L x 11.0”W, 14.6”H
Weight
Model OSC/B       20.7 Lb.
Model OSC/B-1/3 23.7 Lb.


Cylinder Head Scavenger Pump
Models SC/B-2, SC/B, SC/B-2FR, SC/BFR

Cylinder Head Scavenger Pumps equipped with 1/12 HP motor, removable intake filter and submersible pump with check valve. Unit primarily designed to mount to cylinder head with options for wall or floor installation. Available with manual reset pit flood control switch. Constructed of ribbed, reinforced high-density polyethylene 3.6-gallon capacity tank, with 16 gauge galvanized steel removable cover. Recommended plastic tubing 1/2" OD, 100 Ft. Model P02SP008 is not included.

Unit
• Automatic oil discharge operation with internal oil float switch
• Removable stainless steel intake filter, 30 mesh, 590 micron
• Oil inlet port: 1/2" MNPT
• Oil discharge port: brass compression for 1/2" OD tubing
• Container: ribbed, high-density blue polyethylene, 3.7 Gal. 
• Lid: 16 Ga. galvanized steel with 3/4" lip
• Power cord: 3x18 AWG with molded 3-prong plug, 8 Ft.
Options
• Reinforced mounting brackets to mount off cylinder head bolts
• Pit flood control with manual reset, shuts off pump if water present

  Options
  Model SC/B-2 N/A N/A
  Model SC/B Head brackets N/A
  Model SC/B-2FR N/A Flood control
  Model SC/BFR Head brackets Flood control

Approvals
• CSA approved electrical components
Motor
• 1/12HP, 3.5A, 115VAC, 1 PH, 50/60Hz
• Thermal overload protection
• Life time lubricated motor bearings
• Oil-filled to maximize heat dissipation
• Epoxy coated cast aluminum housing and motor cover
Pump
• Wear resistant nylon pumping chamber and vanes
• Viton® shaft seal
• Brass check valve for vertical pumping
• 10-15 Ft. vertical discharge distance
Discharge
• 250 GPH / 4.3 PSI / 10’ Head
• 110 GPH / 8.7 PSI / 20’ Head
Shown for SG=1 (water)
Dimensions
• Container inside:   15.0”L x 9.25”W x 6.0”H
• Container outside: 16.8”L x 11.5”W x 6.3”H
Overall dimensions:
Model SC/B-2      16.8“L x 11.5“W x 6.3H”
Model SC/B         16.8“L x 16.5“W x 6.5H”
Model SC/B-2FR 19.3“L x 11.5“W x 8.3H”
Model SC/BFR     19.3“L x 16.5“W x 8.3H”
Weight
Model SC/B-2      13.9 Lb.
Model SC/B         18.6 Lb.
Model SC/B-2FR 15.7 Lb.
Model SC/BFR    20.3 Lb.



Replacement Parts
Model 15SP004
Model P02SP010R 
Model P02SP008 
Model P02SP227 
Model P01SP001
Model 21SP004
Model 21SP011
Model SC/B-FR
• Stainless steel float & rod
• Copper tubing, 3/8"ID, 50' roll
• Plastic tubing, 1/2”OD, 3/8"ID, 100' roll
• Copper tubing connector
• Plastic tubing connector
• Motor, 1/4HP, 1 phase, 115VAC
• Motor, 1/3HP, 1 phase, 115VAC
• External flood control switch, 6" leads

oscb_01.jpg (269317 bytes)
Heavy-duty Scavenger Pump
OSC/B, OSC/B-1/3

oscb_02.jpg (236529 bytes)
Heavy-duty Scavenger Pump
OSC/B, OSC/B-1/3

oscb-pa.jpg (222526 bytes)
Heavy-duty scavenger pump
Semi-transparent tank, pit flood warning alarm.


scb-2.jpg (177534 bytes)
Scavenger Pump
SC/B-2

scb.jpg (183411 bytes)
Cylinder Head Scavenger Pump
SC/B

scb-2fr.jpg (157520 bytes)
Scavenger Pump
SC/B-2FR

scbfr.jpg (161017 bytes)
Cylinder Head Scavenger Pump
SC/BFR

scb-fr.jpg (147908 bytes)
External Flood Control Switch
SC/B-FR

logo.jpg (29232 bytes)

line.gif (880 bytes)