Click for HOME Click for CONTENTS Click for INDEX Click for SEARCH Click for ORDER FORM Click for INFO blue95.gif (868 bytes)

line.gif (880 bytes)

    CYLINDER HEAD DRIP RING

 

 

• Keeps pit floors dry and safe
• Simple and cost effective
• Installs in 15 minutes
• Made from rubber compound
• Flexible, durable, oil resistant
• Oversized drain resists clogging
• For cylinders 5.75" to 15.5" diameter
• Recommended to use with scavenger pump


Cylinder head drip rings
Cylinder head drip rings
PDF flyer

Elevator pit scavenger pumps
Elevator pit scavenger pumps
PDF flyer


Drip Ring contains leaking fluid from hydraulic elevator heads. It installs below the packing gland head assembly. An oversized, flexible, oil resistant, rubber drip ring is cut and wrapped around the hydraulic cylinder. The inner flange of the drip ring is secured with adjustable metal clamp. Kit includes full instructions, drip ring, splice plate pre-attached to one side, 1/2”ID x 5/8”OD x 30”L drain tubing, drain fitting, adjustable clamp and adhesive sealant.

Drip ring kit dimensions
cdrdr1.jpg (38861 bytes)

Model Diameter A Circumference G H W
CDR-1 5.75" - 7" 18.1" - 22" 1" 1" 2.63"
CDR-2 7" - 8.5" 22" - 26.7" 1" 1" 2.69"
CDR-3 8.5" - 10" 26.7" - 31.4" 1" 1" 2.88"
CDR-4 10" - 12" 31.4" - 37.7" 1" 1" 3.44"
CDR-5 12" - 14.5" 37.5" - 45.6" 1" 1" 3.69"
CDR-IVO* 3.875" 12.2" 1.25" 1.5" 1.75"
* Designed for Dover Inverted head.

Installation Dimensions and Clearances
A  - Diameter of the cylinder where the ring will be installed.
B  - Overhang of the packing head from the cylinder.
C  - Minimum side clearance is 4", or (W+0.25”).
D  - Minimum vertical clearance is 1.125”, 1.625” for Dover Inverted head.
G  - Drip ring inner wall height.
H  - Drip ring outer wall height.
W - Overhang of the drip ring from the cylinder. W must be larger than B.

cdrdr2.jpg (58739 bytes)
Cylinder size and clearances

 

cdr1.jpg (147876 bytes)
Cylinder head drip ring kit

 

 cdrdr4.jpg (42704 bytes)
Splice Plate

 

cdr2.jpg (128795 bytes)
Drip ring installed

logo.jpg (29232 bytes)

line.gif (880 bytes)