Designed to meet ANSI A17.1 Elevator Safety Code
Requirements. All models have pre-drilled mounting brackets with ceramic incandescent
light bulb socket. Up and down buttons have 2 NO contacts for universal compatibility.
Safe button has 1 NO contact. (Contact arrangement can be modified upon request.) CSA
approved.
Model TCI
• Fire service buzzer and jewel, 115 volt
• 3 prong electrical cord outlet
Model TCIG
• Same as TCI
with Ground Fault Circuit Interrupter (GFCI)
Model TCIGNS
16"W x 6"D x 4-5/8"H
• Complete with electronic audible signal in box
• Industrial rated switches for Up/Down/Run and Inspect/Operate
• 110 VAC fire service light and buzzer
• GFCI provided
• Stop switch to comply with A 17.1, Rule 210.2(e)
• Car top light switch with On/Off switch, fused for 5A
Available options:
• Rough service lamp
• Metal lamp guard
• Low voltage fire service signals
• Pre-wired to terminal blocks on back of box
Model TCI-A
• Same as TCI
with 6 volt alarm bell mounted
Model TCIG-A
• Same as TCIG
with 6 volt alarm bell mounted
Model TCIG-A120
• Same as TCI-A120
with GFCI
Model TCID
• Duplex 3 prong electric cord outlet
Model TCIDG
• Same as TCID
with Ground Fault Circuit Interrupter (GFCI)
Model TCID-A
• Same as TCID
with 6 volt alarm bell mounted
Model TCIDG-A
• Same as TCIDG
with 6 volt alarm bell mounted
Model TCID-A-120
• Same as TCID-A
with 120 volt alarm bell mounted
Model TCIDG-A120
• Same as TCID-A120
with Ground Fault Circuit Interrupter (GFCI)
Model TCID-W
• Prewired model
Model TCIG-4X
• NEMA 4X
• GFCI outlet
• 24VDC fire service
Pendant Stations
(Temporary Inspection/Run Stations)
Model PS-40083
Model PS-40133
• UL/CSA approved
• Pre-wired with 15 ft. cable
• Bright yellow finish
