ALARM BELLS
Seven quality models available. AB6 is a red bell designed to work off most
standard emergency light units. (AB6I & AB12 also red). All bells are built with
universal adaptaplates which mount directly on the surface of any single, double or
octagon box. Quick, easy, installation.
|
| Model |
Bell |
Amp |
Voltage |
Decibel (at 10’- 0”) |
| AB6 |
6” |
0.5 |
6VDC |
86 |
| AB6I* |
6” |
0.18 |
6VDC |
90 |
| AB12 |
6” |
0.18 |
12VDC |
92 |
| AB12-AC |
6” |
0.80 |
12VAC |
90 |
| AB120 |
6” |
0.07 |
120VAC |
86 |
| AB120W |
6” |
0.1 |
120VAC |
86 waterproof |
AB120I* |
6” |
0.08 |
120VAC |
88 |
| AB24-4 |
4” |
|
24VAC |
|
| AB240 |
4-1/4” |
|
240VAC |
|
*Model AB6I, AB120I
• Bell with interrupter
• Specially designed for Canadian market
• Decibel rating 90
• CSA approved |
|
AB6
AB6I
|
|
|
|
FLASHING ALARM BELL
6” diameter vibrating bell for indoor or outdoor use.
The solid state bell and light installs quickly.
|
Model AB120F |
• 120V AC
• 0.10 AMP
• Decibel rating 92-94
• Red lens removes easily for lamp replacement |
|
AB120F
|
|
| |
|
ALARM / FLASHING STROBE
Heavy duty, 6” diameter vibrating gray bell. Features continuous ring
with high decibel output.
|
Model
AB120FS |
• 120V AC, .09 Amps
• 7.00 ohms
• Solid state, high intensity, long life xenon strobe
• One flash/second
• Decibel rating 92-94 |
|
AB120FS
|
|
|
|
BRASS BELL
2 1/2” diameter single stroke brass bell
for elevator floor leveling indication.
Each bell individually packaged. Includes identifying label with circuit
and operational information.
|
| Model G115A |
• 864 Ohms
• 115V 60Hz |
|
G115A
|
|
| |
|
OUTDOOR ALARM BELL
White box with
“Elevator Emergency Call Police” in 2” red letters.
Designed to work off standard
emergency light unit.
|
Model OAB |
• Rust-proofed for
outside use
• 9-1/2” H x 13-7/8” W x 3-1/2” D
• Model AB6 6V DC bell inside |
Model
OAB120 |
• Rust-proofed for
outside use
• 9-1/2” H x 13-7/8” W x 3-1/2” D
• AB120 120V AC bell inside |
|
OAB
|
|
| |
|
HANDICAP CHIMES
Electronic replacement for mechanical
bells
|
Model
CA100 |
Arrival Chime - 20-130 VAC/VDC
• ANSI A117.1 , Rule 4.10.4 |
Model
CA100-24 |
Arrival Chime - 24 Volt |
Model
CA101 |
Arrival Chime, extra loud (with
external speaker) |
Model
CP101 |
Passing Chime - 20-130 VAC/VDC
• ANSI A117.1 , Rule 4.10.13 |
Model
CSG102 |
Signal Generator. To activate
floor passing chimes on elevators without a “floor passing signal”. |
|
CA100
|
|
|
|
| AUDIO SIGNALS |
Model
SXL-1600 |
Extremely Loud Piezo Siren
Features:
• Siren Tones
• Flat Mounting Bracket
• 6 -16 VDC Operating Voltage
• 1500 - 4000 HZ Frequency
• 120 dB at 1’
• 250 mA Current Draw at 12 VDC
• 2.15” Diameter, 2.13” High |
Model
SXL-600 |
Electro-Mechanical Audio Indicator
Features:
• Continuous and Pulsating Tones
• Flange Mount
• 9 - 28 VDC Operating Voltage
• 2700 - 3100 HZ Frequency
• 98 dB at 3.28’
• 15 mA Current Draw at 12 VDC
• 2” Diameter, 1.70” High |
Model
AI-430 |
Electro-Mechanical Audio Indicator
Features:
• Continuous Tone
• Flange Mount
• 3 - 28 VDC Operating Voltage
• 2800 HZ Frequency
• 100 dB at 4’
• 7 mA Current Draw at 12 VDC
• 1-5/8" Diameter, 5/8” High
|
|
|
| |
|
| |
|
